1. Application:
The cable is used as power distribution and transmission line at rated voltage up to 1 KV,
which can be fixed installed. For laying in doors, in ducts and direct in ground, able to bear
pulling force and pressure.
2. Construction:
Conductor: copper or aluminum
Insulation: PVC
Cores: single core , 2 Core, 3 Core, 4 Core, 5Core, 3+2 Core, 3+1 Core, 2+1Core
Amour: Al tape or al wire for single core , steel tape or steel wire for others
Sheath: PVC or PE
Size: Up to 800mm2 for single core, up to 500mm2 for 3 cores, up to 300mm2 for others
3. Characteristic:
The long-time working temperature of cable should not be higher than 70℃
When core is in short-circuit (max 5s) the temperature should not exceed 160℃.
While installation the ambient temperature should not be lower than 0℃.
Others: We can design and produce cables & wires as per customer’s special Requirements
4. Standard:
IEC 60502-1, ASTM, BS, DIN, or others as per customer’s country Standard.